LINDEN 3D — Custom Linden Wood Sauna
Custom Wooden Sauna Design and Technology
Extra-Grade Linden, Solid-Wood Benches and 3D Juniper
Natural Extra-grade linden was selected as the primary wood for the sauna interior. Rather than serving simply as a finishing material, solid timber becomes an architectural element of the space.
The benches and backrests were custom-made for LINDEN 3D using solid wood elements approximately 70 mm thick. The construction is designed specifically for an environment where temperature and humidity continuously change.
A distinctive feature is the sculptural 3D juniper, installed by SpaPlanet without a conventional plywood backing. As the natural juniper warms, it releases its characteristic woody aroma. Concealed lighting accentuates the three-dimensional texture of the timber, while geometric illuminated lines across the ceiling define the architecture of the sauna.
Construction and Automatic Humidity Control
Natural timber responds to fluctuations in temperature and humidity. For this reason, the construction of LINDEN 3D allows for the natural movement of solid wood.
The sauna also incorporates automatic excess-humidity control. When predefined humidity parameters are exceeded, the extraction system activates to remove excess moisture.
At the same time, the supply of fresh air can be regulated. Ventilation therefore functions as an integral part of the sauna climate-control concept rather than simply as a means of airing the room.
Controlled Sauna Microclimate and SpaPlanet Technologies
Climatic Steam — Independent Steam Generation
Climatic Steam provides a dedicated steam-generation scenario. The system can be controlled directly from inside the sauna, allowing steam generation to be started or stopped during the bathing session.
Climatic Steam operates independently from the other technologies incorporated into LINDEN 3D. Automated water delivery onto the stones and salt mist generation are separate systems, each designed to perform its own function.
This separation provides greater control over the sauna environment and allows different bathing scenarios to be created.
AromaFlows and Fine-Dispersed Superheated Steam
AromaFlows provides automated delivery of water and aromatic compositions onto the heated sauna stones. Water and aroma delivery can be controlled separately.
The delivery point is integrated directly into the heater zone. Interaction with intensely heated elements produces fine-dispersed superheated steam, creating a distinct steam experience within the sauna.
AromaFlows operates according to programmed settings, providing controlled water and aroma delivery without requiring continuous manual operation.
Salt Mist and Temperature-Layer Equalization
LINDEN 3D also incorporates an independent salt mist generation system. It is separate from both Climatic Steam and AromaFlows and is used to create a dedicated salt-enriched microclimate.
A forced temperature-layer equalization module circulates the air within the sauna, mixing hotter air from the upper part of the room with cooler air below. This helps distribute temperature, humidity and the steam-air environment more evenly throughout the space.
The system operates together with controlled air exchange and a regulated supply of fresh air.
“Second Breath” Fresh-Air System
The “Second Breath” system delivers a directed supply of fresh air to the breathing zone during sauna bathing.
LINDEN 3D incorporates two areas for sauna treatments: the main solid-wood bench and a massage table designed for treating a second person. The amount of supplied fresh air can be adjusted.
Additional fresh-air inlets are integrated into the overall ventilation concept. Salt elements are also incorporated into the ventilation system as part of SpaPlanet’s comprehensive microclimate solution.
Custom Sauna Design and Construction in New York and the USA
Bespoke Sauna Projects for Private Residences and Wellness Spaces
LINDEN 3D demonstrates SpaPlanet’s approach to custom sauna design: interior architecture, bespoke joinery, the sauna heater, steam generation, ventilation, automated water and aroma delivery, salt mist and fresh-air supply are developed as interconnected elements of a single project.
SpaPlanet provides custom sauna design and construction services for projects in New York and across the United States. Each new sauna can be individually developed around the dimensions and architecture of the property, preferred bathing scenarios, number of users and specific client requirements.
Our approach to sauna construction in the USA goes beyond creating a conventional wooden sauna interior. SpaPlanet develops complete wellness environments where natural materials are combined with controlled temperature, humidity, steam and air exchange.
For clients looking for a custom sauna in New York or elsewhere in the United States, the technologies and design principles demonstrated in LINDEN 3D can be adapted to a new individual project without replicating the original interior.